SITUATION DETAIL MAPPING OF THE FACULTY OF MATHEMATICS AND NATURAL SCIENCES, UNIVERSITAS NEGERI PADANG USING TOTAL STATION

Authors

  • Riko Maiyudi Universitas Negeri Padang
  • Adhitya Baron Universitas Negeri Padang

DOI:

https://doi.org/10.57265/georest.v1i2.8

Keywords:

Mining, Situation Detail Mapping, Total Station

Abstract

Detailed Situation Mapping is one of the efforts to provide geospatial information to assist campuses, in this case Padang State University, especially the Faculty of Mathematics and Natural Sciences. Meanwhile Detailed Situation Mapping is a process of measuring and mapping the topography of the earth's surface on a large scale. The situation map contains elements of natural and man-made features on the earth's surface complete with elevation values ​​represented by contour lines. In the measurement process, mapping survey tools are used. One of the tools used is a total station. To make a detailed map of a place, in this case FMIPA UNP, you need location coordinates that are scattered at various points. In order for the resulting maps to be in accordance with geospatial conditions in the field, various applications such as surpac, autocad, arcgis, and so on are used. In the measurement of the horizontal control frame, the closed polygon method was used, while for the measurement of the vertical control frame, the precision flat measurement method was used. For the measurement of detail points, the extrapolation method is used. Meanwhile, for the measurement of high points, the trigonometric method is used using a total station. The type of research used is quantitative research with a descriptive approach. The quantitative research method is a type of research whose specifications are systematic, planned and clearly structured from the start to the creation of the research design. The detail positioning method is carried out for situation mapping at the State University's Faculty of Mathematics and Natural Sciences by measuring the three-dimensional (x, y, z) position of the details determined by the azimuth component (angle, direction and height difference from the tie point). Because of the large amount of detail that is being measured, measurements are made using a fast technique, called tachymetry.

References

Amir, Zulfahmi. 1998. “Dasar-dasar Pengukuran Terristris dan Pemetaan Situasi”. Padang. Universitas Andalas.

Arif, Ir Irwandy. 2016. “Geoteknik Tambang”. Gramedia Pustaka Utama.

Basuki, S. 2006. “Ilmu Ukur Tanah”. Yogyakarta: Universitas Gadjah Mada Press.

Basuki, Slamet. 2011. “Ilmu Ukur Tanah”. Gadjah Mada University Press, Yogyakarta.

Cahya, Doni Muslim, Yuwono Yuwono, and Akbar Kurniawan. 2021. "Analisis Perbandingan Nilai Koordinat Wall Station Sebagai Titik Kontrol Posisi Tambang Bawah Tanah dengan Pengamatan Poligon Tertutup dan Pengikatan Ke belakang (Studi Kasus: Tujuh Bukit Underground Project, PT. Bumi Suksesindo)." Geoid 16.1 (2021): 57-67.

Fauzi, Mohammad Ruly. 2015. "Penggunaan Total Station dalam Perekaman Data Arkeologi di Indonesia." (2015): 113.

Hernandi, A. 2011. “Kerangka dasar pemetaan”. Bandung: Institut Teknologi. Bandung.

Iskandar, I. M. (2008). “Teknik Survey dan Pemetaan untuk Sekolah Menengah Kejuruan Jilid 1”. Jakarta: Direktorat Pembinaan Sekolah Menengah Kejuruan.

Maiyudi, Riko. 2021. Ilmu Ukur Tambang. Padang Universitas Negeri Padang

Muda, I, 2008. “Teknik Survei dan Pemetaan Jilid 2” . Jakarta: Direktorat Pembinaan Sekolah Menengah Kejuruan.

Muljono, Budi. "aplikasi pengukuran tanah mengunakan metode pengukuran poligon tertutup dengan memperhatikan faktor- faktor kesalahan pengukuran." (2011).

Mulkan, S.F.,Sumaryanto, 1980. “E.,Ilmu Ukur Tanah Wilayah, Departemen Pendidikan dan Kebudayaan”

Prakasa, F. 2016. “Laporan Akhir Pekerjaan Pemetaan Batas Lot dan Instalasi Kabel dan Pipa Bawah Tanah di Kawasan Pariwisata Nusa Dua”. Bandung: PT. Inovasi Mandiri Pratama.

Prasidya, Anindya Sricandra, Rochamukti Rizcanofana. 2019 "Pemetaan Topografi Area Longsor Di Jalan Hantar Km10 Plta Musi, Bengkulu Menggunakan Total Station Berbasis Reflektor”. Seminar Nasional Geomatika. Vol. 3.

Purwohardjo, U. U. 1986. “Ilmu Ukur Tanah seri A”. Bandung: Institut Teknologi Bandung.

Putra, Bekasi raya. 2020. “Pengertian Poligon Tertutup”. Bekasi Press.

Putri, A. D. S., & Kustini, I. (2018). Penerapan Media Pembelajaran Video Tutorial Total Station Pada Mata Kuliah Pengukuran Sipat Datar Dan Praktikum Pada Mahasiswa Pendidikan Teknik Bangunan Universitas Negeri Surabaya. Jurnal Kajian Pendidikan Teknik Bangunan, 2(2/JKPTB/18).

Sosrodarsono, S. dan Takasaki, M. (Editor), 1983, “Pengukuran Topografi dan Teknik Pemetaan”, PT Pradnya Paramita, Jakarta, Bab 3 dan 4.

Suhendra, Andryan. "Studi Perbandingan Hasil Pengukuran Alat Teodolit Digital dan Manual: Studi Kasus Pemetaan Situasi Kampus Kijang." ComTech: Computer, Mathematics and Engineering Applications 2.2 (2011): 1013- 1022.

Tim Praktek Kerja Lapangan., 2013, “Buku A Panduan Praktek Kerja Lapangan”, Program Diploma 3 Teknik Geomatika Sekolah Vokasi Universitas Gadjah Mada, Yogyakarta

Tribhuwana, Awliya. 2018.“Perbandingan Pengukuran Luas Area antara Theodolit dan Global Positioning System (GPS). LOGIKA, Desember 2018, XXII (3):58-64”. Cirebon: Universitas Swadaya Gunung Jati.

Tistro, R., Purbaningtyas, D., Ardy, M., & Turangan, D. (2020). Pengukuran dan Pemetaan Kampus Politeknik Negeri Samarinda. Jurnal Inersia, 8(1), 1-12

Wardana, I, M. 2013. “Pembuatan Peta Situasi Lokasi 6 di Dusun Purwosasono Desa Beluk Kecamatan Bayat Kabupaten Klaten Jawa Tengah. (Laporan Praktek kerja Lapangan”. Semester VI TA 2012/2013). Universitas Gadjah Mada, Yogyakarta.

Wongsotjitro, Soetomo 2008. “Ilmu Ukur Tanah”. Kanisius, Yogyakarta.

Downloads

Published

2023-02-04

How to Cite

[1]
R. Maiyudi and A. Baron, “SITUATION DETAIL MAPPING OF THE FACULTY OF MATHEMATICS AND NATURAL SCIENCES, UNIVERSITAS NEGERI PADANG USING TOTAL STATION”, georest, vol. 1, no. 2, pp. 4–10, Feb. 2023.

Issue

Section

Articles